Parting Locks for Injection Mold with High Temperature Resistance /
PA-66 Materials Parting Locks
The nylon parting lock is a part that adjusts the friction between
the mold and the nylon sleeve by locking the conical bolt. It
consists of nylon sleeve and alloy steel bolts two parts, nylon
sleeve color has white, yellow, red, blue four kinds.
Parting locks make the mold easy to take off. During the working
process, the friction between the mold and resin is adjusted by the
inclined screw, and the mould can be closed about 50,000 times by
turning about 1/4 circle.
The materials of the cone bolt is alloy steel, has excellent
tensile strength and fatigue resistance, and the screw thread
adopts international standards. The nylon sleeves are produced by
PA66 and special additives, different colors have the different
|materials of bolt||alloy steel||Color||white,blue,red,yellow|
|materials of sleeve||PA-66||Size||φ10~20|
The color and performance of parting locks are as follows:
|yellow||Wear-resisting||blue||High temperature resistance|
1. The sleeve of parting locks are used special nylon material, has
good wear resistance and heat resistance, although the nylon sleeve
heat resistance temperature is 150, but in the actual use process,
because of the continuous effect of the locking stress of conical
bolts, durability of the nylon sleeve will be reduced, so it
general used below 80℃.
2. Do NOT add lubricating oil on nylon sleeve.
Packing and Shipping
The parting locks are packaged with plastic boxes or PE bags as the
pictrue show, and customized package is welcome.
About the shipping, all the well-known express companies and ocean
shipping can be selected, but in remote areas, we can only use EMS.